?FICOLPO

New/Like New

Feature Light Source Color: White Material: Silicone + Led Lamp Beads Working Voltage: DC 11V - 18V Working Power: 15W - 25W Length: 98.43 inches Waterproof Rating: IP67 Product Includes: 1 x LED Strip, 1 x Adapter Cable, 1 x Silicone Plug Applicable Models: For Tesla Model Y 2021, for Tesla Model Y 2022, for Tesla Model Y 2023, for Tesla Model 3 2021, for Tesla Model 3 2022, for Tesla Model 3 2023 Warm tips: For some models, the light strip may be too long, you can cut it to a suitable length. The cutting position is the end of the front trunk light tape (not the wire end). Please seal the cut end with tape after cutting (Equipped with a silicone plug that fits over the shear opening). Due to the use of high brightness LED wick, the light strip may get hot after a long time of use, but it does not affect the use. How To Install 1. Open the trunk light cover. Unplug the original connector behind the bezel. Connect the plug of the light tape to the car connector on one end and the trunk light on the other end. Then suck the magnetic ring to the original car's ground wire cylinder. Note: If the light strip fails to light up, you need to check whether the plug is firmly inserted and whether the magnetic ring is firmly grounded wire cylinder. 2. Pull apart the front trunk waterproof adhesive strip, and embed the trunk light strip into the car adhesive strip. When installing, first start from the light bar with wire to center mount, then around the car adhesive strip a circle to install light strip. 3. Finally organize the wire and insert back into the bezel.

1 QTY =

GRA4059905

New/Like New

835 Edwin C. Moses Blvd., Dayton OH 45417